Turning Data into Knowledge

CognIoT™ is a trademark of
Bostin Technology Services Ltd.

Copyright © 2017 by BostinTechnology Services Ltd  ·  All Rights reserved  ·  Sales@BostinTechnology.com
Break Out Boards
iCog™ sensors are easily interface to the Pi using a break out board. These connect between the 40-pin connector of the Pi and the 6-pin header of the iCog™. All iCogs™ use the same header and maybe connected with any break-out board.

If you need access to the SPI and I2C ports of the Pi then the Multi-Serial Break Out Board provides the solution.

The I2C Serial adapter and the Pi2C+ bring out the I2C port or the Pi to both a convenient 4-pin 0.1" header and to the iCog compatible 6-way 0.1" connector.
Multi-Serial I/O Adapter.
PibOMs
The Multi-Serial I/O adapter from CognIoT™ brings the UART, I2C and SPI ports to convenient 0.1” connections. Raspberry Pi add-ons that require any of the serial ports can be easily connected via the Multi-Serial I/O adapter.
• All of the headers have 3.3V and GND as well as the signals of the port.
• The I2C port has footprints (0603) for user-fit optional pull-ups on SCL and SDA
• The Raspberry Pi 26-pin header and the chip select pin header  are supplied ready for the user to solder to the adapter board.
• The CS (chip select) signal for the SPI port can be selected at SPI_CS0 or SPI_CS1 from pins 24 and 26 of the Pi header.
Pi2C™.
I2C Serial Adapter.
The I2C serial Adapter from CognIoT™ brings the I2C port from the Raspberry Pi to convenient 0.1” connections.
• I2C port with SCl, SDA power and ground
• 2nd I2C port with additional GPIO ports to support iCogs with interrupt signals
• All of the headers have 3.3V and GND as well as the signals of the port.
• SCL and SDA have the footprints (0603) for optional, user-fit pull-up resistors.
• The Raspberry Pi 26-pin header  is supplied ready for the user to solder to the adapter board.
Pi2C+™.
HAT Compatible I2C serial Adapter
The I2C serial Adapter from CognIoT™ brings the I2C port from the Raspberry Pi to convenient 0.1” connections.
• Same features as I2C Serial adapter but additional 24LC32A HAT ID EEPROM